Self-inspection and troubleshooting methods for power generation lighting equipment:
Self-inspection and troubleshooting methods for power generation lighting equipment:
1. Why does the engine fail to turn on: check whether the generator has the air door open; whether the engine oil is too full or too little.
2. Why does the engine jitter: Check whether the power generation lighting equipment is placed in a balanced zone; whether the generator forgets to turn off the air door after the generator is started.
3. What slippage of the power-generating lighting equipment: Check whether the power-generating lighting equipment is placed in balance; whether the brake device of the universal wheel is stepped on.
4. Why the generator shuts off automatically after starting: check whether the air door is open; whether the gasoline (diesel) is gone.
5. Why the lifting lighting equipment cannot be raised and lowered: Check whether the air pump switch for the air supply is turned on; whether the air supply pipe is connected; whether there is a loose connection position that is not inserted in place, causing air to run out.
6. Why can't the generator drive the light: Check whether the light is connected well; whether the light switch on the control system is turned on.
7. The remote control cannot control the lighting equipment: check whether the remote control is equipped with batteries; whether the switch position on the control system is set to the remote control position; whether the antenna on the control system is unplugged; whether the remote control range exceeds the remote control range guided by the manufacturer.